Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Google+

Workshops

May 14th, 2018

Die-Casting — an Overview

More articles by »
Written by: Bart Brejcha
Tags: , , , , , ,

(Above image courtesy of Metal Technologies)

Die Casting is a process in which molten metal is forced under high pressure into a mold cavity. The molten metal is is forced into a split metal die. Certain metals are cast in a “hot-chamber” die-casting machine, and others in a “cold-chamber” machine. Metals with melting points below 730°F are cast with the hot-chamber machine (Zinc, lead, and tin alloys). Due to molten aluminium dissolving ferrous parts, aluminum alloy is cast in the cold chamber machine.

Even dies for creating simple shapes are complex with many moving parts. The dies must be robust enough to withstand high metal injection pressures reaching up to (10,000 lbf/in2),yet it must create fine surface detail inside the casting. More sizable dies are normally cooled by channeling water behind the heavier casting sections inside cores.

 

Image courtesy of Design for Manufacturability Handbook,
 Second Edition. DIE CASTINGS, Chapter (McGraw-Hill
 Professional, 1999, 1986), AccessEngineering

 

 

General design considerations

When creating a product that will be manufactured through die casting, the designer must study the overall function of the product and think about design and how it effects  manufacturability.

According to NADCA ( North American Die Casting ), to aid the development of a diecast model and to diminish the possibility of feature tree errors, the following CAD feature order is recommended:

Base geometry features: Put the features that comprise the base geometry of the model at the top of the feature tree, including bosses, extrusions, revolves, cuts, shells, lofts and sweeps.
Cast cored holes: Holes that you will cast during the manufacturing process, and which you may or may not tap or machine later.
Parting lines: Placing the parting lines next in the feature order including any parting line that appears in a component after applying the draft.
Draft: This feature goes next.
Fillets: Add fillets to all geometries, with the exception of some parting lines.
Machining: Lastly, add all machine features at the end of the feature order — suppressed and unsuppressed.

 

When designing for die casting we have to think about manufacturability. When it comes to working with dies, the manufacturability of parts is reliant on a specific scope of influences. Fundamental areas of concern are:

1. Grain direction of the material
2. Openings, their shape and location
3. Bends and other three-dimensional alterations to the flat part, their shape and location
4. Outline of the part and its size
5. Applicable tolerance ranges
6. Surface finish, flatness, straightness, and burr allowance

 

When it comes to die-casting there’s much to learn. There is a very resourceful book that goes in to great depth about this manufacturing topic: Product Design for Die Casting — Published by the Die-casting Development Council of the North American Die Casting Association.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

Design Engine trains engineers and industrial designers using various CAD software, such as PTC creo, Solidworks, Rhino, Maya, Alias, and more. Design-Engine conducts numerous design classes and workshops in Chicago and onsite all over the United States and the world. Included in the part design and manufacturing page of the training offering, are Creo and Solidworks plastic part design for injection molding classes, and Solidworks or Creo Die Cast part design class.

Topics for this training class:

  • The process, die cast molds, tooling, processing factors, nominal walls, radii & draft angles, ribs, weld lines, stress, cooling metals, bosses, undercuts.
  • Also Snap Fit, FEA, design recommendations, overview of flow mold analysis software.Learn to design molded undercuts and sliders.
  • Learn about various die cast materials and alloys and discuss material properties such as adding zinc and copper for more malleable alloys i.e. Kohler faucets.
  • Learn about the metal mold itself and many of its intricacies such as sleeve ejection, how it is cooled, sprue and runner, ejector bars, ejector plates, and ejector pins.
  • Discuss the steps for die the casting process.Learn about the pore-free casting process for eliminating gas porosity.
  • Learn about heated-manifold direct-injection die casting.

          and much more.

 

There will be a 2-day Creo Die Cast Part Design workshop 5/31/2018 – 6/1/2018.

Die Cast Part Design

If there is interest in training during a different time of the year, or interest in a onsite class at your company, please contact an account manager.

 

Ivana Suchy: Handbook of Die Design, Second Edition. BASIC DIE DESIGN AND DIE-WORK INFLUENCING FACTORS, Chapter (McGraw-Hill Professional, 2006 1998), AccessEngineering

James G.Bralla: Design for Manufacturability Handbook,Second Edition. DIE CASTINGS, Chapter (McGraw-HillProfessional, 1999, 1986), AccessEngineering

https://diecasting.com/blog/2016/01/04/design-tips-for-die-casting-parts/

 


About the Author

Bart Brejcha
As the main instructor for Design-engine Bart teaches many of the PTC Creo & the Solidworks Surfacing classes. When he is not developing new training material you will find him on motorcycles, bicycles or on a skateboard. He loves any kind of racing on two wheels.




Design Engine Industrial Design Training Pro Engineer
 
 

 

Sketching — Another Way for Engineers to Communicate Ideas

                    Engineers need to possess many skills, most of which being technical, however, especially for engineering design, creativity is also required. In order to in...
by Bart Brejcha
0

 
 

“The Future of Work is Learning” – Heather McGowan

Automation and Artificial Intelligence are words that are used interchangeably but are very different. Automation is defined as “automatically controlled operation of an apparatus, process, or system by mechanical or elec...
by Bart Brejcha
0

 
 
Raffle Prizes

Peoria PTC User Group – Bradley University

We at Design Engine had such a great time putting this event together with Bradley University. It was great having everyone get together and talk about design, engineering, and PTC. Each presentation ran about an hour. Here is ...
by Scott Froemming
0

 

 

2018 Chicago Auto show

I was fortunate to be able to attend the Chicago auto show media preview days. With that, photographers were able to walk through the floors and take pictures of the vehicles without fighting through crowds or taking dozens of ...
by Bart Brejcha
0

 
 
The StarWars BB8 replica

Bridging the Gap: Bridgewater Studio Brings Fantasy to Reality

Let me just start by saying, this place is awesome! Selfishly, I had wanted to set up a tour to play with their awesome BB8 replica as the nerdery is strong with me, but when I visited Bridgewater Studios I got much more than I...
by Bart Brejcha
0

 



0 Comments


Be the first to comment!


You must be logged in to post a comment.