Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Google+

Industry News

July 11th, 2012

New Speedo Racing Swimsuit, Fastskin3 – Built Using ANSYS

More articles by »
Written by: Design-Engine
Tags: , , , , , ,

Speedo’s introduction of its drag reducing LZR Racer swimming outfit created a controversy during the 2008 Beijing Summer Olympics. The suit worked so well that it was subsequently outlawed by the Fédération Internationale de Natation (FINA) as the technological equivalent of doping – it provided too much of an advantage. Now, with the help of ANSYS simulation software, and just in time for the 2012 London Summer Olympics, Speedo has introduced the Fastskin3 racing system, which offers a new and apparently legal approach to drag reduction during competitive swimming.

Rather than specify a standard suit, or possibly special materials from which a suit must be made for international competition, FINA decided to limit the portion of the body that could be covered. For men, this was from the waist to the knees, and for women, from the shoulder to the knee. Their intent was to prevent the design of performance-enhancing suits such as the Speedo LZR Racer, but the restriction was so narrow that it simply required that a different optimization process be carried out.

The result is Speedo’s Fastskin3 Racing System. When worn as a complete system of suit, cap, and goggles, passive drag, which impedes gliding while submerged, is reduced by up to 16.6 percent, and the amount of oxygen needed by the swimmer at a given speed is reduced by up to ten percent. Finally, active body drag, resulting from the waves that the swimmer creates, the swimmer’s constantly changing shape and the force of the water passing over the body’s surface, is reduced by as much as 5.2 percent.

Development of the racing system relied on expanded multiphysics simulations that included both fluid dynamics and structural mechanics. For example, the shape of the cap was optimized for low drag and turbulence, as were the effect of using a range of materials and construction techniques to insure that the caps will withstand the stresses of competitive swimming.

The simulations also examined how the cap, goggles, and suit interact with each other, so that the overall design is of a system whose components not only have individual characteristics, but also support each others’ operation to improve overall performance. Following the design work, Speedo arranged for pool tests of Fastskin3 prototypes by professional U.S. swimmers, including Natalie Coughlin, Ryan Lochte and Michael Phelps.

“Engineering simulation has been absolutely critical in launching this world-first concept,” said Tom Waller, head of Speedo’s in-house global research and development facility. “For the first time, competitive swimmers can use a cohesive, hydrodynamic solution that will help them cut through the water with maximum efficiency. In developing the Fastskin Racing System, ANSYS software gave us the confidence that our designs would perform as expected in the real world – and saved us a huge amount of resources that we would otherwise have had to invest in physical testing.”

But one factor ANSYS cannot simulate is FINA’s reaction to the new design – will Speedo’s Fastskin3 system also be outlawed? The Olympic results will likely be a key factor in their decision.

Click To View Images:

New Speedo Racing Swimsuit, Fastskin3 - Built Using ANSYS New Speedo Racing Swimsuit, Fastskin3 - Built Using ANSYS New Speedo Racing Swimsuit, Fastskin3 - Built Using ANSYS New Speedo Racing Swimsuit, Fastskin3 - Built Using ANSYS

Article Written by: Brian Dodson


About the Author

Design-Engine





Design Engine Industrial Design Training Pro Engineer
 
 

 

Why Dyson Is Well Positioned for the Electric Car Space

Written by Dave Mazovick Over the past few years it has become known and acknowledged that Dyson is planning to enter the electric car arena by with what it describes as innovative, forward thinking products that will rethink...
by Bart Brejcha
1

 
 

2018 International Design Excellence Award Winners Announced

The Industrial Designers Society of America (IDSA) announced this year’s International Design Excellence Awards (IDEA) winners at their annual ceremony this past week. The annual IDEA gala, held this year on Sept. 19 at The N...
by Bart Brejcha
0

 
 

New York Wants You to Redesign Their City’s Trash Bin

New York City has over 23,000 litter baskets outside. The most common design is the green wire mesh basket – due to the affordability and easy serviceability, the design has been left mostly the same since the 1930s. New ...
by Bart Brejcha
2

 

 

Die-Casting — an Overview

Die casted part design (Above image courtesy of Metal Technologies) Die Casting Die Casting is a process in which molten metal is forced under high pressure into a mold cavity. The molten metal is is forced into a split metal d...
by Bart Brejcha
0

 
 
Raffle Prizes

Peoria PTC User Group – Bradley University

We at Design Engine had such a great time putting this event together with Bradley University. It was great having everyone get together and talk about design, engineering, and PTC. Each presentation ran about an hour. Here is ...
by Scott Froemming
1

 



0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *