Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Google+

Events

December 4th, 2017

Northern Utah SOLIDWORKS User Group

More articles by »
Written by: Bart Brejcha
Tags: , , , , ,

Northern Utah SOLIDWORKS User Group (NUSWUG) – A group to link SOLIDWORKS professionals in the Greater Salt Lake Area, to share tips-n-tricks and best practices using SOLIDWORKS and to connect engineering and design professionals.

Date: 12-07-2017
Time: 05:00 PM – 07:00 PM
Length: 2 Hours 0 Minutes
Location: Edwards Lifescience
Agenda: 5:00pm – 7:00pm | RSVP required | NUSWUG@gmail.com

  • Simply SOLIDWORKS Open Forum Best Practices, Tips-n-Tricks
  • Ask the Expert, Bring your Technical SOLIDWORKS Questions
  • Prize Drawings

Location: 12050 Lone Peak Pkwy 
Draper, UT 84020

 

Contact: Chad L. Clarke

 

 

 


About the Author

Bart Brejcha
As the main instructor for Design-engine Bart teaches many of the PTC Creo & the Solidworks Surfacing classes. When he is not developing new training material you will find him on motorcycles, bicycles or on a skateboard. He loves any kind of racing on two wheels.




Design Engine Industrial Design Training Pro Engineer
 
 

 
Raffle Prizes

Peoria PTC User Group – Bradley University

We at Design Engine had such a great time putting this event together with Bradley University. It was great having everyone get together and talk about design, engineering, and PTC. Each presentation ran about an hour. Here is ...
by Scott Froemming
0

 
 

2018 Chicago Auto show

I was fortunate to be able to attend the Chicago auto show media preview days. With that, photographers were able to walk through the floors and take pictures of the vehicles without fighting through crowds or taking dozens of ...
by Bart Brejcha
0

 
 
The StarWars BB8 replica

Bridging the Gap: Bridgewater Studio Brings Fantasy to Reality

Let me just start by saying, this place is awesome! Selfishly, I had wanted to set up a tour to play with their awesome BB8 replica as the nerdery is strong with me, but when I visited Bridgewater Studios I got much more than I...
by Bart Brejcha
0

 

 
skeleton part for creating the welded bicycle & jig components

Top Down Design: And its History

  Brief History of Top Down Design It all starts with Mil Spec standards. “MilSpecs”, are used to help achieve standardization objectives by the U.S. Department of Defense.  Part of  that specification basica...
by Bart Brejcha
0

 
 

3D printing and Spare Part Supply Chain Effects

Everyone keeping up with technology, engineering, and design should have heard about 3D printing. Much of the general population has heard of it, but most likely the majority don’t understand the capabilities and how this...
by Scott Froemming
0

 



0 Comments


Be the first to comment!


You must be logged in to post a comment.