Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Google+

Events

February 27th, 2018

Peoria PTC User Group – Bradley University

Raffle Prizes

We at Design Engine had such a great time putting this event together with Bradley University. It was great having everyone get together and talk about design, engineering, and PTC. Each presentation ran about an hour. Here is a recap of the event.

Keynote Presentation: “The future of CAD tools (and how PTC & Creo will remain at the forefront)”

Overview: In this presentation Bart presented how progressive PTC Creo has been over the years past & present,  and we shed light on what is to come in the future for 3D engineering and development platforms.

Presenter: Bart Brejcha (Design-engine)

Bart Brejcha

“The future of CAD tools (and how PTC & Creo will remain at the forefront)” presented by Bart Brejcha

 

Session A: “Creo Sheetmetal – You think you know sheet metal?”

Overview: This advanced presentation covered converting a solid part (enclosure) into a sheet metal part, then utilizing conversion in order to create a manageable sheet metal part. It also covered the basics of sheet metal in Creo 4.0.  Twenty tips and tricks using Creo 4.0 Creo Sheet Metal tools.

Presenter: Bart Brejcha (Design-engine)

 

Creo 4.0  Sheet metal

Creo 4.0  Sheet metal created using conversion

Session B:“What’s Your AR Strategy and how can you realize it with Creo and ThingWorx?”

Overview: This presentation began with a brief discussion of why PTC believes that every organization needs an AR strategy. Keith showcased some specifics about how Creo 5 and ThingWorx Studio have been built to help companies support those strategies.  He showcased why having a strategy is important so you don’t end up with a tool looking for a problem to solve.  Having a tool that is integrated with your existing product development processes is important for most rapid adoption and scale. 

Presenter: Keith Gargiulo (PTC)

Keith Gargiulo

“What’s Your AR Strategy and How Can You Realize It With Creo and ThingWorx?” presented by Keith Gargiulo

Click for Keith Gargiulo’s Presentation Slides

Session A: “Using Curves & Surfaces for a strategic advantage” 

Overview: Many design engineers use surfaces to create tractor hoods or interior components.  This presentation covered using curves and surfaces as tools to get your job done more effectively in situations that are not related to form.  Bart went over using surfaces to sweep draft, mirror more effectively, pattern lighter, drive equations, manage parameters w/ relations. The bottom line is if you knew some basics of surfacing you are one step closer to becoming the expert among your team members.

Presenter: Bart Brejcha (Design-engine)

Session B: “Do Your OWN Thing with User Defined Features”

Overview: The User Defined Feature (UDF) is a tool that provides great capability in CREO part, assembly, and manufacturing (CNC) modes but it’s one of those tools you tend to forget about when you’re deep into a model. In this presentation, Andy defined the idea of “feature” in a slightly different way and, building on that definition, showed how you can multiply your effort by turning complex features into pick and place features with enhanced capabilities. 

Presenter: Andy Meinert (Caterpillar)

Andy Meinert

“Do Your Own Thing With User Defined Features” presented by Andy Meinert

 Click for Andy Meinert’s Presentation Slides

Raffle

Raffle Prizes

Laila giving away some super sweet swag at the raffle.

Prizes Won:

-Machinery’s Handbook
-Force1 U45W-A Drone
-Amazon Gift Card
-USB Drives
-Headphones
-Swag

Sponsors:

Design Engine would like to give special thanks to all of our sponsors for their support and contributions:

-Bradley University
-PTC
-Boundary Systems
-Prostep
-Caterpillar

Future Presentations:
You tell us! We are open to ideas for future workshops. Here are some we have in the works for future presenations:

  • Creo Freestyle
  • Form surfacing Exteriors & Interiors 
  • Reverse Engineering with REX from scan data
  • Artificial assist
  • Behavioral modeling
  • Creo Schematics
  • Creo Welding

 

 

skeleton part for creating the welded bicycle & jig components

skeleton part for creating the welded bicycle & jig components

 

welded bicycle assembly created from a skeleton part

welded bicycle assembly created from a skeleton part

 


About the Author

Scott Froemming





Design Engine Industrial Design Training Pro Engineer
 
 

 

Sketching — Another Way for Engineers to Communicate Ideas

                    Engineers need to possess many skills, most of which being technical, however, especially for engineering design, creativity is also required. In order to in...
by Bart Brejcha
0

 
 

“The Future of Work is Learning” – Heather McGowan

Automation and Artificial Intelligence are words that are used interchangeably but are very different. Automation is defined as “automatically controlled operation of an apparatus, process, or system by mechanical or elec...
by Bart Brejcha
0

 
 

2018 Chicago Auto show

I was fortunate to be able to attend the Chicago auto show media preview days. With that, photographers were able to walk through the floors and take pictures of the vehicles without fighting through crowds or taking dozens of ...
by Bart Brejcha
0

 

 
The StarWars BB8 replica

Bridging the Gap: Bridgewater Studio Brings Fantasy to Reality

Let me just start by saying, this place is awesome! Selfishly, I had wanted to set up a tour to play with their awesome BB8 replica as the nerdery is strong with me, but when I visited Bridgewater Studios I got much more than I...
by Bart Brejcha
0

 
 

Carpet Cloak for Invisibility

“For generations, the topic of invisibility has been of great interest. Although it was once dismissed as science fiction, it has now become reality on a small scale. Physics textbooks around the world must be rewritten and s...
by Bart Brejcha
0

 



0 Comments


Be the first to comment!


You must be logged in to post a comment.