Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Google+

Industry News

August 15th, 2017

The Proposed Improvements to Chicago’s Lake Shore Drive

A fresh set of renderings for the transformation of Chicago’s Lake Shore Drive have been revealed. The new plan calls for a 70-acre park extending out into Lake Michigan as well as upgrades to the beaches at Oak Street and Ohio Street.

The new proposals have been developed by the state and city departments of transportation, in conjunction with the U.S. Army Corps of Engineers. Officials have been wanting to make changes to Lake Shore Drive for many years now. However, they have eliminated some previously proposed, unrealistic improvements – such as bus tunnels under the lake and the construction of a light-rail line alongside the highway – and are focusing on the expansion of Lake Shore Drive.

Daniel Burnham, legendary Chicago architect, is responsible for the 1836 mandate which requires Chicago’s lakefront to, “Remain forever open, clear and free of any buildings, or other obstructions.” 2nd Ward Ald. Brian Hopkins believes, “This is one of the best things we can do to improve not just our neighborhood, but the entire city. I think Daniel Burnham would be proud.”

Part of the improvement to Lake Shore Drive includes a reduction to the dangerous Oak Street S-curve, where many crashes and spinouts occur. Straightening out the S-curve would require for beaches to be pushed into the lake and buffered with 70 acres of new parkland. The Chicago Avenue exit off Lake Shore Drive would also be reconfigured in an attempt to get rid of some of the constant build up of traffic. Additionally, the new plan would likely call for reserved lanes of traffic for buses and other high-occupancy vehicles.

While how the city plans to pay for the project is still unclear, with the Army Corps of Engineers involved, it could be likely that federal funds may be of help. Still, if the plan is approved, construction wouldn’t begin until at least 2020.


Source via Curbed , DNAinfo, Renderings via VOA Associates


Written by Mila Medonaite for Design Engine August 15, 2017 


About the Author

Mila Medonaite





Design Engine Industrial Design Training Pro Engineer
 
 

 
The StarWars BB8 replica

Bridging the Gap: Bridgewater Studio Brings Fantasy to Reality

Let me just start by saying, this place is awesome! Selfishly, I had wanted to set up a tour to play with their awesome BB8 replica as the nerdery is strong with me, but when I visited Bridgewater Studios I got much more than I...
by Bart Brejcha
0

 
 
skeleton part for creating the welded bicycle & jig components

Top Down Design: And its History

  Brief History of Top Down Design It all starts with Mil Spec standards. “MilSpecs”, are used to help achieve standardization objectives by the U.S. Department of Defense.  Part of  that specification basica...
by Bart Brejcha
0

 
 

ThingWorx, Augmented Reality, and IoT in the workplace

AR/VR, along with the Internet of Things (IoT), has been talked about for a few years now as the next big thing. To help get it straight, Techcrunch explained it like this: Virtual Reality (AR): places users inside the virtual ...
by Bart Brejcha
0

 

 

3D printing and Spare Part Supply Chain Effects

Everyone keeping up with technology, engineering, and design should have heard about 3D printing. Much of the general population has heard of it, but most likely the majority don’t understand the capabilities and how this...
by Scott Froemming
0

 
 

Man vs Machine – Rossi against Yamaha Robot

Author: Sean MacDonald Originally published on cycleworld.com November 3, 2017   Yamaha claimed back in 2015 that it would build a robot that could ride a motorcycle around a racetrack faster than Valentino Rossi...
by Bart Brejcha
0

 



0 Comments


Be the first to comment!


You must be logged in to post a comment.