Design-engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Design Engine News

September 20th, 2017

Proterra’s Electric Bus Breaks World Record, Traveling 1,102 Miles on A Single Charge

California-based company Proterra believes their electric buses could be another step towards removing our reliance on fossil fuels. Proterra’s Catalyst E2 Max Electric bus set a new world record for the longest distance traveled – 1,102.2 miles – by an electric vehicle on a single charge.

The 40-foot bus packs a hefty 660kWh battery, as compared to a Tesla Model S P100D which has a 100kWh battery and a 315-mile range. The 660kWh battery’s power is equivalent to that of 11 Chevy Bolts and can be recharged to full capacity in just an hour using Poterra’s high-speed charging system. Matt Horton, Proterra’s chief commercial officer talked about the company’s achievement in a news release, “For our heavy-duty electric bus to break the previous world record of 1,013.76 miles — which was set by a light-duty passenger EV 46 times lighter than the Catalyst E2 max — is a major feat.”

While the Catalyst E2 Max is still just a test bus, Proterra does have a $700,000 priced model currently being sold with a range of roughly 350 miles. Proterra execs believe dropping battery prices will allow for buses and trucks with ranges over 1,000 miles to become more commonplace in the very near future. Ryan Popple, Proterra’s chief executive believes, “We’re entering an era where electric vehicles are simply better than internal combustion engines on range.”

Source via: Proterra 


Written by Mila Medonaite for Design Engine, September 20, 2017





Design Engine Industrial Design Training Pro Engineer
 
 

 
A near Future of PTC Windchill.

Past Present & Future of CAD

CAD communication tools have evolved over the past 60+ years. At Design-engine we call CAD communication tools. From 2D line drawings to 3D CAD tools and in turn, these always placed a demand on the speed and innovation of the ...
by Design Engine
0

 
 

The CAD Renaissance Comes to Denver

Today, CAD is more relevant, more innovative, more powerful than ever. Join the Creo team in Denver, Colorado, on Thursday, May 23 for a day of expert-led learning, peer discussion, and fun. This event will position you for suc...
by Design Engine
0

 
 
Design for Additive Manufacturing with CREO

Creo Behavioral Modeling Extension Training: Level 17

Creo Behavioral Modeling Extension (BMX) Course Duration: 16 Hours Overview: PTC Creo’s Behavioral Modeling Extension or better described as artificial intelligence assist allows users to minimize iteration time by apply...
by Design Engine
0

 

 
Design for Additive Manufacturing with CREO

Creo Design for Additive Manufacturing: Level 19

Creo Design for Additive Manufacturing: Level 19 Course Duration: 16 Hours Overview: Is your organization ready to unleash the full potential of additive manufacturing? This is a two-day hands-on course on the design optimiz...
by Design Engine
0

 
 

Here are 5 of the Coolest Products on the Internet!

Here is a list of 5 of the coolest innovative products ranging from a headpiece that will improve your sleeping to a soccer ball that is able to track game statistics through a chip! UrgoNight Headband We live in a world that i...
by Greg Cali
0

 



0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *