Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals


Google+

Ideas, Thoughts, Perspectives

December 29th, 2015

Is The ArcaBoard The First REAL Hoverboard?

A hoverboard, by definition, should hover. Recently, many so-called “hoverboards” have become all the rage, even though they don’t actually make you fly. The ArcaBoard, a new type of hoverboard, is different because it actually hovers off the ground.

Arca Space Corporation in New Mexico developed the fan-powered Arcaboard to be able to hold up to 243 lbs and hover up to a foot over any surface, even water. Made of composite materials and weighing 180 pounds, the ArcaBoard is clearly not something that can easily be carried around, at least not by one person. The ArcaBoard is equipped with 272 horsepower and 203,000 watts of installed power but can only currently hover for about six minutes before it needs to be recharged. The charging process can take six hours with it’s “off the box charger” but if you purchase the ArcaDock (sold separately) you can charge the hoverboard fully in about 35 minutes. Unfortunately at $19,900 the ArcaBoard won’t be something most people can afford.

 

Image via Arca Space

Image via Arca Space

Image via Arca Space

Image via Arca Space

Image via Arca Space

Inside the ArcaBoard are fans, controllers and batteries. Image via Arca Space

36 high-power electric ducted fans, controllers and batteries, along with a high performance coding system are needed to power the hoverboard. Their website explains that, “By using 36 power fans we ensure that even in the case of multiple motor failures there are enough motors remaining to take over so you keep on riding.”

The design of the hoverboard is focused on simplicity – the very simple rectangular shape was needed to “provide stability, durability and safely contain the tremendous power within.

Image via Arca Board

Image via Arca Board

Image via Arca Space

Image via Arca Space

What do you think, is the ArcaBoard the first step towards hoverboards as transportation?

Article Written by Mila Medonaite for Design Engine, December 29, 2015


About the Author

Design-Engine





Design Engine Industrial Design Training Pro Engineer
 
 

 

Afterburn: Design for Manufacturability Using SolidWorks

AFTERBURN: Design for Maneuverability Using SolidWorks WHAT: Design Engine is hosting our AfterBurn networking event with a discussion in our Chicago studio.  Join us Thursday, October 18th from 6:00 PM – 9:00 ...
by Scott Froemming
2

 
 

Worlds Largest Manufacturing Trade Show — IMTS 2018 brief

IMTS — A Manufacturing and Engineering Extravaganza Manufacturing professionals gathered at IMTS — International Manufacturing Technology Show. It takes place Sept 10-15 at McCormick Place in Chicago. IMTS 2018 is expected ...
by Bart Brejcha
1

 
 
Lime to Relaunch in Denver

Lime to Re-Launch in Denver

Mobility Action Plan in Action Just a few short weeks after being removed from Denver’s streets, dockless scooters are set to make a comeback. Denver residents woke up one May morning to find hundreds of bright-green scooters...
by Bart Brejcha
3

 

 

New York Wants You to Redesign Their City’s Trash Bin

New York City has over 23,000 litter baskets outside. The most common design is the green wire mesh basket – due to the affordability and easy serviceability, the design has been left mostly the same since the 1930s. New ...
by Bart Brejcha
2

 
 
Maya

The Magic of Pixar and Maya

Last Friday we went on a work field trip to discover the magic behind Pixar Animation Studios through an exhibit at the Museum of Science and Industry in Chicago, IL. Since we offer classes using Maya software, we wanted to und...
by Bart Brejcha
2

 



One Comment



Leave a Reply

Your email address will not be published. Required fields are marked *