Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals



Industry News

November 1st, 2018

Why Dyson Is Well Positioned for the Electric Car Space

More articles by »
Written by: Dave Mazovick
Tags: , , ,
Written by Dave Mazovick
Over the past few years it has become known and acknowledged that Dyson is planning to enter the electric car arena by with what it describes as innovative, forward thinking products that will rethink and refashion ground transportation both technologically and in terms of aesthetics.

Much like Tesla, Dyson is very heavily defined by its founder and owner James Dyson who has in the past few decades made a name for himself and his company for innovations starting in the vacuum cleaner space which  have since evolved into new and better ways of creating everything from table fans to hand dryers. The combination of  leaked documents a few years ago, along with the purchase of solid state battery firm Sakti3 and it’s more recent plans to revamp an old Royal Air Force airfield into an electric vehicle test track are already in motion. This has resulted in most of the industry viewing both the Dyson and Apple electric car programs as two of the worst kept secrets in the entire EV space. The current facility already has two renovated hangers and work on three additional buildings will be completed in coming months. In addition Dyson intends to build over 10 miles of test track and include various terrain and topography to simulate different driving conditions. The present 400 workers on the facility will be expanded to accommodate over 2000 people by next year. The cost of the first phase of renovations cost over 100 million USD. The second phase, inclusive of the test track, will cost a further 150 million USD.

 While some might dismiss James Dyson’s incessant drive for an electric car as Me-tooism (In effect we’ve been innovating exciting new and improved products with electric motors for decades) while Musk and company has in the past few years stolen our thunder there are valid reasons to take a Dyson electric car seriously. Dyson does have a long history of bringing to market numerous products that have featured new and improved electric motors that were typically more powerful, efficient and quiet than those that preceded them. This in turn would bode well for the production of electric cars where electric motors are integral to the power train but also overlooked are how many electric motors are present within most cars inclusive of power windows, fans and lift gates. Furthermore Dyson has at its disposal over 4000 engineers many straight out of university who are encouraged to brainstorm with unconventional engineering approaches in an effort to foster a culture of innovation and forward thinking. Dyson himself had articulated why the simple and accepted idea of the windshield wiper could more effectively be replaced by jets of air that would consistently sweep away water that might otherwise accumulate on a car windshield.

Like many industrial designers, inclusive of Lovegrove and Rashid, have for years articulated the need to rethink and reinvent even the most basic design aspects of the automobile and the arrival of the electric car will allow for an unprecedented freedom and creativity in the design of the shell of future vehicles. Even established car designers such as Henrik Fisker and Ian Callum have stressed the need for a dramatically different approach when designing electric drive train cars with a greater emphasis of aerodynamics and cab forward profiles now more possible due to the relatively small imprint of electric motors. While the jury may still be out on whether the purchase of solid state battery manufacturer Sakti3 was a boon or a bust, it seems likely that they do have some 64 patents and which might give them a leg up in the race to mass market a viable solid state battery in house . On the other hand this could still be several years away.

Another strong suit is Dyson’s having a tradition of making all it’s parts in house and not being as dependent of parts suppliers and outsourcing. Dyson also has the capability to produce lightweight high tensile strength carbon fiber parts which will give them a leg up on both legacy and start up manufacturers. In the meantime it seems more likely the debut proof of concept vehicle Dyson is striving to bring to market by 2021 will likely be lithium ion powered and very likely in the 6 digit figure range. They will follow this initial vehicle with two additional vehicles which will be higher volume cars aimed at the mass market. Looking at the recent Jaguar I-Pace and juxtaposing what Dyson is likely to achieve in the next few years, these two the seminal firms are well positioned to lead the U.K auto industry towards a clean, quite emission free future.





Design Engine Industrial Design Training Pro Engineer
 
 

 

Single-Use Plastics Ban

The European Parliament recently voted a ban on particular single use plastics, things such as cutlery and plates, cotton buds, straws, drink-stirrers.  The proposal is also demanding reduction in other single use plastics. Th...
by Eli Petrov
0

 
 

The Arrival of Super Magnesium

In the course of focusing on new innovations, products and technologies we typically avoid the unproven, recent laboratory breakthrough or the idea that might be several years away from being a tangible product available to the...
by Dave Mazovick
0

 
 

2018 International Design Excellence Award Winners Announced

The Industrial Designers Society of America (IDSA) announced this year’s International Design Excellence Awards (IDEA) winners at their annual ceremony this past week. The annual IDEA gala, held this year on Sept. 19 at The N...
by Ariel Berchtold
0

 

 

New York Wants You to Redesign Their City’s Trash Bin

New York City has over 23,000 litter baskets outside. The most common design is the green wire mesh basket – due to the affordability and easy serviceability, the design has been left mostly the same since the 1930s. New ...
by Design Engine
2

 
 

Die-Casting — an Overview

Die casted part design (Above image courtesy of Metal Technologies) Die Casting Die Casting is a process in which molten metal is forced under high pressure into a mold cavity. The molten metal is is forced into a split metal d...
by Design Engine
0

 



One Comment


  1. Tim

    I would welcome Dyson making electric cars.



Leave a Reply

Your email address will not be published. Required fields are marked *