Design Engine
Training Classes/Tutorials for Designers, Engineers, & 3D Professionals



Product Reviews

May 10th, 2013

Canon 6D – Wifi and Iphone Compatible

More articles by »
Written by: Design-Engine
Tags: , , ,

Canon 6D – Wifi and Iphone Compatable

As the full frame DSLR market grows ever-more crowded though – Canon, Nikon and Sony each offer at least two full frame models – the appeal of the 6D may well rest on things like handling and feature set. While Canon obviously needs to maintain clear distinctions between the 6D and the pricier 5D Mark III, the challenge is to offer enough incentive for current EOS owners who lack a substantial lens investment to resist the similarly priced and slightly higher-resolution Nikon D600.

And as is Canon’s wont, they have opted for the allure of familiarity and consistency. The EOS 6D is perhaps best understood as a full frame version of the popular EOS 60D – indeed it’s very similar in both control layout and dimensions. While slimmer front-to-back, and lighter than the Nikon D600, the 6D primarily seeks to distinguish itself on the spec sheet with built-in Wi-Fi and GPS, a ‘silent’ shutter mechanism and, according to Canon, unprecedented low-light focusing sensitivity. Whether this combination will be enough to satisfy enthusiasts who’d appreciate the D600’s distinctly higher spec’ed autofocus system, dual card slots and built-in flash remains to be seen.

Canon EOS 6D key specifications

  • 20.2MP full frame CMOS sensor
  • DIGIC 5+ image processor
  • ISO 100-25600 standard, 50-102800 expanded
  • 4.5 fps continuous shooting
  • ‘Silent’ shutter mode
  • 1080p30 video recording, stereo sound via external mic
  • 11 point AF system, center point cross-type and sensitive to -3 EV
  • 63 zone iFCL metering system
  • 97% viewfinder coverage; interchangeable screens (including Eg-D grid and Eg-S fine-focus)
  • 1040k dot 3:2 3″ ClearView LCD (fixed)
  • Single SD card slot
  • Built-in Wi-Fi and GPS
  • Single-axis electronic level

The EOS 6D is built around a new Canon CMOS sensor, which offers a pixel count of 20.2MP (compared to the Nikon D600 and Sony SLT-A99’s 24MP, and the 5D Mark III’s 22MP). In concert with the DIGIC 5+ processor it offers a standard ISO range of 100-25600, expandable down to 50 and up to 102,400. The AF system has 11 points, but only the central one is cross-type (sensitive to both vertical and horizontal detail). However, the 6D’s trump card is the ability to focus in extremely low light levels; right down to a claimed -3 EV – a full stop dimmer than the 5D Mark III. This figure might not mean much to you, but for reference, -3 EV is roughly equivalent to the light cast by a full moon.

Notable additions include integrated GPS and Wi-Fi – with the latter offering the ability to control the camera remotely via your smartphone. The 6D also benefits from some features we saw in the EOS 5D Mark III, like Canon’s silent shutter mode, which offers quieter, more discreet shooting. It also inherits in-camera HDR and Multiple Exposure modes, but disappointingly implements these as JPEG only options, unlike on the 5D Mark III which also records Raw files.

The 6D omits some of the more interesting goodies Canon introduced on the EOS 650D, too. There’s no on-chip phase-detection to aid autofocus in live view or movie mode, nor does Canon’s superb touchscreen interface make an appearance. As usual for a full frame DSLR – the Sony SLT-A99 being the sole exception – the rear screen itself is fixed, rather than articulated as it is on the EOS 60D. Canon says this is for maximum durability and to keep the camera’s size down.

Check out the review on DP Review

 

[nggallery id=22]





Design Engine Industrial Design Training Pro Engineer
 
 

 

Peoria PTC User Group — 2019

2019 Peoria PTC User Group  Sponsored by Design Engine and The Department of Mechanical Engineering, Bradley University. Registration provided by Continuing Education, Bradley University   —  RSVP form Date: Friday, May 3r...
by Liz Wisdom
0

 
 

The Importance of STEM Education

What is STEM? STEM stands for science, technology, engineering and mathematics and is a term that it used in order to group together these academic disciplines. The acronym was initially used in education to begin to acknowledg...
by Greg Cali
0

 
 
CAD Camp

Design Engine Presents: CAD CAMP

Does your child love video games, 3D printing, social media, or robotics? This summer, join the future minds of STEM at Design Engine’s CAD CAMP. Design Engine has over 20 years of experience training industry professiona...
by Design Engine
0

 

 

How CAD Revolutionized Product Design

Product design, by definition, is the process of creating a new product to be sold by a business to its customers. The process includes the set of strategic and tactical activities, from idea generation all the way through to t...
by Greg Cali
0

 
 

Creo vs. SolidWorks: Which is better?

What is Creo? Creo is a computer-aided design (CAD) program that was initially released in 1987 as Pro/ENGINEER by the company Parametric Technology Corporation (PTC). It was one of the first major solid modelers to enter the C...
by Greg Cali
0

 



0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *